Norweld’s Tradie Canopy Range – Find the setup that works for you
For decades, Norweld has built the toughest ute trays and canopies for adventurers. Now, we’re bringing that same uncompromising quality to tradies. Introducing the Norweld Tradie range.
Built tough for the demands of trade work, it’s designed with added strength, security, smarter storage solutions and heavy-duty wiring to power your gear.
From canopy-specific setups to bolt-in accessories and electrical upgrades, the Tradie Range will get your vehicle kitted out right. Let’s break it down.
Tradie Canopy options
We understand that every tradie’s needs are different. That’s why we’ve created three canopy options, each available in 2-Door and 3-Door configurations:
Tradie Basic Canopy (2 and 3-Door Canopy)
The open-plan design gives you flexibility to bolt in accessories to suit your work needs, with internal tie-down points and an Ergo Safe Flush Floor (ie: no lip to lift over). The 2-Door Canopy setup includes two spare wheel carriers, a great option for long-distance or remote travel.
The 3-Door Canopy setup offers full rear access without compromising strength, thanks to reinforced rear pillars. This setup doesn’t include spare wheel carriers, so your choice between the two comes down to whether you need to prioritise rear access or spare wheel storage.
Tradie Cargo canopy (2 and 3-Door Canopy)
Building on the Tradie Basic canopy setups, the Tradie Cargo Canopy adds a fully welded, built-in small drawer and table storage on the passenger side. It’s compatible with all bolt-in accessories and features a concealed battery compartment to keep power systems secure and slimline.
This Ford Ranger tradie setup showcases the Tradie Cargo 3-Door Canopy on top of the Elite Tray.
Tradie Contractor (2 and 3-Door Canopy)
For those wanting more drawer storage and table space, the Contractor Canopy takes things up a notch with a fully welded Large Drawer and Table Unit, a great feature that allows you to secure and organise various-sized tools and materials without taking up too much space.
Get a Quote
Tradie Gullwing Toolbox with Tilt Roof Option
A strong, versatile storage solution, the Gullwing Toolbox in our standard range has been uniquely designed to maximise internal and external space. With 25mm Unistrut rebated and welded laterally along the rear, it offers plenty of infrastructure inside for mounting gas bottle holders, compressors and other accessories. Need to haul a 44-gallon drum? No worries – you can fit one between each toolbox and with the new Tradie Tilt Roof Option, you can stand up and slide them in and out easier than ever before. The Tilt Roof also provides a good platform for mounting solar panels, letting you chase the sun while adding another layer of security and weather protection.
Organise your tradie canopy with bolt in accessories
A good tradie canopy setup isn’t just about space – it’s about organisation and accessibility. The Norweld Tradie Range includes Bolt-In Partitions, Poly Slide Drawers and Adjustable Shelving.
The Bolt-In Partitions create designated areas within your canopy to secure tools, bolt in fire extinguishers, hang extension leads or store roller cases and Milwaukee storage systems.
To save on weight without sacrificing strength or durability, we have introduced Poly Slide Draw Units, which are not only lightweight but also dust-resistant. Pop in, pop out, don’t rattle, don’t rust. There’s no ball bearings to fall out either – if you’re on a job site with cement dust flying, you can just hose them out—too easy!
The Adjustable Shelving Units let you organise your storage space even further. Set the height and tilt the shelves for a configuration that’s fit for purpose. They are also removable, giving you the flexibility to take your equipment closer to the task at hand.
With additional tie-down points and gussets, you can build a versatile and secure storage solution for any job, ensuring your gear stays put when driving.
Ute canopy electrical setup for Tradies
The new Tradie Wiring Package has been designed specifically for these canopies, ensuring a seamless fit. We’ve also incorporated multiple wiring access points, under-floor wiring access and a concealed battery compartment for a cleaner, more organised setup.
Redarc On-Site Wiring Package: Bigger battery, bigger output
For Tradies needing serious power, the Redarc On-site Wiring Package delivers:
- Redarc 50A BCDC Alpha Charger with start battery charge-back option
- Redarc RS3 2000W Inverter – ideal for running power tools on the go
- Enerdrive 200a/h BTEC Lithium Battery – long-lasting and high-performance
- Enerdrive Epro Battery Monitor and Shunt for power management
- Multiple charge ports: USB A, USB C, Engel Fridge Socket, 2x Anderson Plugs
Our full range of wiring packages are also available in the Tradie range.
What vehicles are compatible?
The new Norweld Tradie Range is available for Gen2 (1850W 1826L) Compact vehicles in Dual Cab, Extra Cab and Single Cab configurations. Toyota LandCruiser models are also available in Single Cab and Dual Cab, though Dual Cab is limited to the Compact Canopy due to under-tyre space constraints.
With regards to paint, you can get your Tradie Tray and or Canopy painted or unpainted—whatever suits your style best.
Why choose a Norweld Tradie Canopy?
The Norweld Tradie Canopy range —like all our ute canopies—has been designed, engineered and refined off the back of 50 years of innovative know how. Delivering the very best quality, quality that you can rely on when it matters most. With precision laser-cut and fully welded aluminium construction, reinforced structural points and built-in stiffeners, the tradie canopy range isn’t just tough—it’s built for trade jobs. And let’s be real—it looks the part too. Sharp, clean and guaranteed to turn heads on any job site.
Like all Norweld products, the Tradie range is built from our exclusive Unistrut extrusions and heavy-duty marine grade aluminium and backed by our Lifetime Warranty on all Workmanship. Our builds are built to last – Australian Made quality with nationwide support.